Yuru Two-component Polyurethane Waterproof Coating Waterproof Paint

Multi-component (two-component) polyurethane waterproof coating is a multi-component reaction curing polymer waterproof coating, which is a polyurethane prepolymer obtained by polycondensation reaction of polyether and isocyanate, plasticizer, curing agent, and plasticizer. Multi-component liquid composed of thickener, coagulant, filler, etc. When using, mix the multi-components in a certain proportion, and after stirring evenly, paint on the surface of the base layer that needs to be constructed, and form an elastic, tough and durable waterproof coating film after reaction and curing.

Color：

Black, gray, blue, green, other customizable colors.

Features：

1. The waterproof coating film has high elongation, high strength and good elasticity.
2. The coating film is dense, free of air bubbles and pinholes.
3. Cold construction, convenient construction.
4. Corrosion resistance, acid, alkali, salt and other chemical components.
5. Strong adhesion to the base surface, strong impermeability.

Scope of application:

1. Non-exposed roof waterproofing.
2. Underground waterproofing: basement floors, side walls, nurse walls, tunnels.
3. Others: roof, bathroom, kitchen, balcony, non-edible pool, wall pipe, water outlet, etc.
4. Waterproof coating for concrete roof, waterproof paint for leak-proofing.
   

Construction points:

1. Basic requirements: flat, firm and fully dry.
2. Ingredients: According to the construction dosage, mix each component in proportion and stir evenly.
3. Large-area waterproof construction: apply the mixed paint evenly with a rubber or plastic scraper, and the thickness is required to be consistent, generally 1.5mm-2.0mm. It should be painted in 3-4 times, and the next painting should be cured after the previous painting After the film is formed, it is scraped in a vertical direction.
4. End closures and edge treatments: Additional coatings for closure.
5. Protective layer: The surface of the waterproof layer of the coating film should be isolated and protected according to the design requirements to prevent damage to the waterproof layer of the coating film.

Technical Data Sheet:

Packaging & Storage：

30kg/group(can be customized)

Room temperature storage in 12 months.

Reference Dosage：

The amount of 1.0mm thick coating film prepared according to the weight ratio of A: B = 1: 2 is approximately: 2.2Kg / m² (if special parts are to be waterproofed, you can add a release fiber cloth or Spinning.)

Yuru two-component polyurethane waterproof paint, entity manufacturer, sufficient inventory, timely delivery, waterproof coating for concrete roof, waterproof and anti-corrosion, good aging resistance, high-quality supplier of waterproof coating for building materials.